Practical, technically grounded articles on waterproofing, concrete repair, resin flooring, decorative cement and vinyl flooring in Botswana.
A practical way to narrow down between three very different flooring categories.
Read Article →
How the pattern works, which ranges offer it, and why it's a glue-down job, not a floating floor.
Read Article →
What PoolCrete is, how it differs from Pool Quartz and Pool Coating, and what to check before plastering a pool.
Read Article →
Tiles aren't waterproof — why the membrane underneath matters more than the finish on top.
Read Article →
The step most floor problems trace back to — moisture testing, mechanical prep methods, and what happens when it's skipped.
Read Article →
Most waterproofing failures come down to application, not product. A look at what our contractor training days cover and why it matters for your project.
Read Article →
Spalled or corroding concrete only stays fixed if the repair follows the right sequence. We walk through surface preparation, priming exposed steel, bonding, and reinstatement using ABE durarep and epidermix systems.
Read Article →
Both systems perform well, but for different reasons. A practical look at thermal flexibility, mechanical loading, chemical resistance and cost — and how to decide which resin system actually suits your environment.
Read Article →
Strengths, limitations, and how to decide between ABE's torch-on membranes and liquid-applied systems for your roof, balcony, or below-ground structure.
Read Article →
Cracking, ponding water, damp ceilings, efflorescence, and aging membranes — what to check before Botswana's rains arrive, and what to do if you spot them.
Read Article →
System type, substrate condition, area complexity, access, and product vs installation cost — what actually drives waterproofing pricing.
Read Article →
Substrate condition, system type, area, and finish — why a fixed per-square-metre price online can be misleading, and what actually drives the cost.
Read Article →
Dusting, cracking, ponding, staining, and worn coatings — what to check before a small floor issue becomes a bigger repair.
Read Article →
How static-dissipative flooring works and which environments — electronics, server rooms, labs — typically need it.
Read Article →
Both deliver a smooth concrete-look finish, but suit different substrate conditions. A practical comparison to help you choose.
Read Article →
Product type, substrate condition, area, and sealing — why a fixed per-square-metre price online can be misleading.
Read Article →
Dulling, staining, water absorption, wear patterns, and colour fading — what to check and why sealing isn't a one-time job.
Read Article →
Both give you a wood-look floor for less, but wet-area suitability and budget set them apart. A practical comparison.
Read Article →
Product range, installation method, and accessories — why a fixed per-square-metre price online can be misleading.
Read Article →
Peaking, gapping, water damage, worn wear-layer, and locking system failure — repair or replace?
Read Article →Browse our FAQ, or get in touch directly — we're happy to help with product selection and technical specification.